Friday, May 19, 2017

More FM (FUCKING MAGIC)

When I bought the truck a year and a half ago the cruise control and the temp/compass didn't work. After doing research in the repair manual and online discovered both are on the same fuse, which is good. Did some more research and found videos on youtube on how to repair the temp/compass. A common problem is a resister could come loose. The fix is to solder it back together.

The resistors are the little rectangular ones on the bottom right. There are 3 of one value and 2 of another.
When I pulled it apart it looked like the above picture. As I couldn't see any breaks or anything wrong I did a bit of solder on all the resistors on both ends with  my cheap soldering iron I got at Harbor Freight. When I put it back together and plugged it in and turned on the key I said, "Holy Shit it works!!"

 When you press the Select bar there are 3 options, Fahrenheit, Celsius, and Off. I also discovered it gives more info.



While there wasn't any ice, it did snow yesterday before I took these pictures. Fixing this surprised the shit out of me as this is a prime example of FM (Fucking Magic)!! When it comes to electrical shit I usually can figure out when a bulb is burnt out and replace it, which may be the problem with the airbag system. On the airbag system I get a code saying the passenger switch is bad and the usual problem is the bulb is burnt out. Problem is it isn't a simple unplug and replace, it's a special bulb that is soldered in. If I could find a bulb I probably could replace it. Or I could buy one, saw some used ones for about $30 that claim they are guaranteed to work or money back.

As for the cruise control it still doesn't work. In googling about it I've found a variety of things that can cause it to not work. Included burnt out brake lights?? Ran a diagnostic of the cruise and at first couldn't get the diagnostic to work, after fixing the temp/compass the diagnostic worked OK. The cruise still doesn't work. I will do more checks to see if I can figure out what the problem is.

Thursday, May 18, 2017

Less Than A Dollar A Year!!

Back in 2010 I bought a used router at Goodwill in Hot-Lanta. I checked my photos and I have one of the router taken in Dec 2010.


This photo is from when I first got the router. I wasn't looking for a router at the time I bought it, I actually was just looking for a power supply for The Kid's keyboard. The power supply for the router was close to the right voltage and had the right plug. It just happened to come attached to the router so I decided to see if it worked as we had two confusers and the laptop had WiFi capabilities. It did work so I went back to Goodwill and found another power supply for the keyboard.

This shows the price still on the transformer for the router.

After over 6 years of use it was acting up. I would have to reboot the router by unplugging it for 10-15 seconds and plugging it back in. The new notebook seemed to be more sensitive to the WiFi signal than my old laptop. We are still having problems with the intratubes and I decided we didn't need the router adding to it!! So last Monday we went to Best Buy and bought a new router.


Maybe I should have wiped the fingerprints off of it before I took the picture?? Anywho, this is the new router, it is a dual band one. The notebook and smart phones can use either the 2.4 gig or 5 gig. My old laptop (built in 2009) only recognizes the 2.4 one. So far it seems to be working OK. With the notebook the old router would be in and out at times until I would reboot it.

Like all electronics it is FM (Fucking Magic)!!

The problem is that at $80 I don't think I'll live another 80 years in order to get the same amount of value from the new router as I got from the old one!!


Saturday, April 29, 2017

Sometimes I Wonder

Lately I've been wondering why I even bother having email?? Other than a couple humorous sites and a couple sites for buying shit, about all I get in my inbox is political shit. I've unsubscribed from a bunch and still there is a ton (seems like when you sign up for a site they have multiple senders and you would have to do the unsubscribe from every one that sends out shit for that site.



Anywho, the real reason I wonder about why I keep my email accounts is I can go for weeks without getting any personal emails and then it's usually one that slips in from a crazy relative with a forward of some outlandish far-right-wingnut BULLSHIT!! Hopefully I've blocked all of the email accounts of that relative that's gone over to the darkside!!

It seems that email has become obsolete as snail mail??

Wednesday, April 19, 2017

Interesting Travels With The Guppy

It has been interesting traveling in The Guppy. On the way to Arizona the driveshaft fell out and we had to abandon the tow dolly. But all in all we made it to our destination. On the way back we had different problems. When we took off in AZ I had to jump it started. After I gassed it up it started without a jump. That was the last time it started without a jump. In Grand Junction, CO I bought a new battery. I had hoped to make it home before buying a new battery, but the old one wouldn't hold enough charge to start anymore.




These are the two rear tires from the driver's side. When we got into Missouri I felt a vibration and couldn't figure out if it was the road or a tire. When I on to a different road and the vibration was still there, I stopped at a truck stop and checked the tires. They all had air and the lugs were tight. I got about 5 miles farther and one of the rear tires came apart. Most of the tread came off, but it still was inflated. I had stopped on an uphill stretch so I drove a little farther to where it was more level. I couldn't go much further because someone else was on the shoulder with a flat. Looking back it could have been worse, I could have still been on US-60 with no shoulders, but I was on I-49 which did have a shoulder just barely wide enough for The Guppy. Anywho, I changed the tire while hoping I didn't get run over by the traffic. After I had the spare on we continued on our way. We stopped at a campground that we had kinda planned on for the night. The next day we hit the road again and got about 100 miles when the other driver's side rear tire did the same thing. Most of the tread came off, but it eas still inflated. I didn't want to repeat the previous tire change and didn't have another spare so I drove slowly on the shoulder to the next exit. I stopped at a gas station and asked where I could find a tire shop.

I was told there was a tire shop at the next exit, but I couldn't get there by a side road. I took the tire from the day before in my car and went searching for new tires. At the next exit there was some kind of tire shop (no garage, just a couple of building and a pile of old tires. Nobody was there so I asked st that gas station where I could find another tire shop. I was told there was one 7 miles down the road at the town. I drove there, found the tire shop and they must have been out to lunch also. A guy at the gas station across the street yelled someone would be there in a few minutes. Anywho, the guy had the tires I needed and I got one on the wheel I had with me. Went back and put the new tire on The Guppy and then drove it to the tire shop to get 3 more tires.

The tires were 16 years old and when 2 of them went so close together, I decided to replace all 4. When the second tire let go it did some damage underneath. It tore up a wire bundle that I'll have to figure out what the wires are for when I replace them. It also broke the pipe from the gray water tank. And it ripped the mudflap off. So I will have some work to do before we can use The Guppy.

We purposely avoided Kansas because of our problems going thru Kansas on the way out and turned out Missouri bit us!!

Why does shit happen when you are cruising thru BFE??

Sunday, February 12, 2017

Got My Driveshaft Back

On our way out to AZ the last section of the driveshaft fell out. While I was under The Guppy working on that part of the driveshaft I noticed that one of the carrier bearings had some play in it. I could shake it up and down and around. Turned out it wasn't the bearing but the rubber that the bearing was mounted in. As the carrier bearings are pressed on to the shaft that wasn't a job that I could do myself in the RV park. I probably wouldn't be able to do it at home, although I do have a way to press things with a hydraulic jack and a framework. Anywho, it took two weeks, but I got my driveshaft fixed. I found a shop that had a bunch of signs across the front of it and one of the signs said bearings, so I took the driveshaft out and brought it there.


They only had one of the carrier bearings in stock and had to order the other one. That's what took so long. I also had them replace the u-joints on this part of the driveshaft. Now it has all new bearings. Hopefully it will last as long as The Guppy will last.


These are the old bearings. I didn't get one of the hangers back, but I don't care. I may or may not have a use for the bearings, but I just wanted to get the old parts back. The u-joints I may be able to use on my old plowtruck if any of the u-joints wear out.

There you go, http://dablogfodder.blogspot.com and http://thefilecabinet.blogspot.com
I put up a post for you guys!!

Saturday, January 14, 2017

It's Working

The Old Lady wants to call it Casper Jr.*
We got a small dehumidifier recently and at first we weren't sure how well it was working. It did get some water in the tank, but weren't sure just how much it was doing to reduce the moisture in The Guppy. At first it was in the living/kitchen area and then I put it up on the bunk over the cab. One of the reasons we got it was because there was a lot of condensation on the window across the front of the bunk area. It would run down the glass and fill the channel in the window frame and then run down the paneling. I had brought along a piece of paneling to replace the piece that was getting wet. I didn't want to replace the panel until the condensation problem was fixed. Today I checked the front window and there was hardly any water on the inside of the glass. The dehumidifier had been on the bunk running for a couple days. The tank on it was a little less than half full. The tank holds half a liter or about a pint.

We got a new neighbor a few days ago and he suggested putting small bubble-wrap on the inside of the windows. He had just come down from Denver and said he had done that with his windows and had no trouble even with below zero temps. I am thinking about trying that with some of the windows, like the ones we don't need to see out, the front window in the bunk area is a prime candidate.

*My middle name is Casper, so that's why the Jr for the little white machine. 

Wednesday, December 21, 2016

I Think We Need A New Awning

This is the way we had the awning set up. I put a board down under the upright in front and screwed the upright to it. That way it wasn't in the way like it would be when it is attached to the side of the motorhome. It made it easier to walk around but it also made it more hassle to close up. 
A few nights ago it was windy. The awning was out and flapping pretty good. About 5 o'clock in the morning the Old Lady said she was worried about the awning because it was making so much noise. We were out trying to get the awning closed when it ripped. When we bought The Guppy the awning had already been ripped by high winds on the end that attaches to the motorhome. The previous owner had used a couple of furring strips and screws to attach the awning to the side of the motorhome. We figured we would have to replace it at some time, just have been wondering what design on the awning to get. The Old Lady would like one with the logo of her alma mater. Question is which one, Michigan Tech or Virginia Tech?? The school colors for Virginia Tech would sorta match the accent strips on The Guppy. Anywho, we had sorta figured on replacing it sometime this winter and now we really need to do it if we want shade.


I'm making a cover for the windshield and doors. I had an old tarp with a couple of rips in it so it wasn't much use for covering stuff. I was able to cut pieces out of it to cover the windshield and the windows in the doors. I have it taped together temporarily but will need to sew the pieces together as the tape isn't holding very well. I used aluminum tape as I thought it would hold better than duct tape. Well it doesn't seem to stick to the tarp very well. I bought some strip magnets to hold it in place and is laying smoother than in this picture. The strip magnet came in a roll, so I laid it out for a day or so to straighten out, but it still wants to curl. I laid the magnets out on the trunk of the car during the afternoon and  overnight. But when I cut pieces from it, they at times still want to curl.


Another thing I've done is put a piece of sheetmetal under the door for the water heater to direct the water away from the compartment under it. The relief valve on the water heater weeps after the water gets hot in the water heater. I replaced the relief valve and it still weeps some water. I thought maybe the city water pressure at campgrounds was too high, so I got a pressure regulator that is supposed to keep the pressure at 40-50 psi. It still weeps. There is no way to adjust the temperature on the water heater, which if I could lower the temp (which gets real hot) that might stop the problem. In any case, I thought this would at least stop the water from running down the door for the storage compartment below the water heater. Yesterday I saw some guys working on the skirting for a trailer here in the RV park and I asked if they had any scrap pieces of sheetmetal that I could have. The guy cut off a piece and gave it to me. I then cut it to size with my utility knife and installed it. I took the screws out across the bottom of the water heater and slipped the sheetmetal up under it and replaced the screws to hold the sheetmetal in place. The piece was bent at one edge and it makes a trough for the water to run off to the side and away from the compartment door.

Saturday, December 10, 2016

A Week in Paradise

We flew back from Hawaii a week ago. We had fun while we were there even tho it rained a lot. One of the things that was new to us was the rental car. It didn't have a key. All we got was a fob. It would lock and unlock the doors, do the panic thing (blow the horn) and it also had to be in or around the car in order to start the car and to open the tailgate, liftgate, whatever. I think if you were to buy that model it would come with a key as there was a slot on the handle for the driver's door for a key, but it had a piece of scotch tape over it.

This was the rental car, a Buick Encore.
  At first I would put the fob in the cupholder in the console, but then I thought what if I locked the doors and couldn't open them. After that revelation I would keep it in my pocket and only take it out to unlock and lock the doors.

This is the fob.

One of the things that I didn't like was there wasn't an owner's manual in the car. When we first got it the dash was saying the percentage of the oil change that had been used. One day I played with it and didn't figure out how to change it. When I tried again a day or so later I was able to figure out how to navigate the menu and put it on fuel range. That way I had some idea on how far I could go before it ran out of gas. We had paid for filling the tank at the time of the rental and the guy said as long as we brought back with less than  a 1/4 tank it would be a good deal. We managed to run it down to about 60 miles left and because it was over 25 miles back to the airport and we weren't done running around I put $5 worth in it, which was a littl over a gallon and a half at $2.929 a gallon.

One of the places we went was Waimea Canyon. It was interesting and at the observation places the wind was such you almost had to lean into it to get close to the railing at the edge.

Waimea Canyon
Here's a link to more pictures and info on Waimea Canyon, the Grand Canyon of the Pacific.

We managed to see most of the island, Kauai isn't a very big island. There is still some stuff we didn't see, but we only had a week and like I said it rained a lot. It would rain and some times it was a downpour, but later it would stop and the sun would come out. Some days it would be off and on rain, we would wait until the rain stopped and then go out and play tourist. Almost everywhere people will say, "If you don't like the weather, wait a while and it'll change!" Well, it certainly was true while we were on Kauai. I don't remember it raining so much when I was on Oahu almost 30 years ago, but I was there in April that time.

Monday, November 14, 2016

Devil's Donuts

When I first saw this commercial I didn't know if it was a parody, satire or real. I guess it is real. Still it strikes me as really weird!!